Precision battery internal resistance tester HT3563-60V
High voltage accuracy, increased test line capacity, anti-static impact resistance, and support for multi-channel testing
Overview
HT3563 is a battery internal resistance tester with high precision and wide range using the four-wire test principle and high-performance microprocessor control. The internal resistance and voltage are measured at the same time, which is fast and stable.
7 internal resistance ranges are from 3mΩ~3kΩ, the test resistance display range is 0.0001mΩ~3.1000kΩ with the minimum resolution of 0.1uΩ. The voltage range is 10V~60V (2 ranges), the test voltage display range is 0.00001V~60.00V with the minimum resolution is 10uV.
Basic functions introduction
HT3563 series battery tester is designed to test battery AC internal resistance AC-IR and DC voltage DCV (OCV). Using four-wire test method, high-precision, low-temperature drift, and high-integration chip control loop design make it perform better, more accurate, and stable in low resistance level measurement.
By adding the multi-channel scanning tester, HT3563 series battery tester can scan and measure multiple batteries at the same time, improving test production efficiency.
Multi-grade sorting judgment, full-scale short-circuit clearing
RS232/RS485/LAN interfaces
Support both SCPI and Modbus protocols, RS232/RS485+ SCPI/Modbus, LAN+SCPI
Equipped with Handler I/O interface
Users can use rich interfaces to connect and control automated testing equipment, efficiently completing remote control and data acquisition as well as instrument networking
HT3563 can be used for product development & testing, and automated production lines. Test all kinds of dry batteries, lithium batteries, nickel-metal hydride batteries, nickel-cadmium batteries, button batteries, cylindrical batteries, pouch batteries, power battery packs, energy storage, batteries, etc.; Meanwhile, the ESR AC impedance of supercapacitor batteries can also be tested.
Application
- Inspection of high-voltage battery pack and battery module
- High-speed mass production inspection of various batteries
- For large, medium and small (low impedance) component inspection and high volume production inspection
- Special fuel cell stack inspection
- Research and development measurement for batteries
- Simultaneously check internal resistance (IR) and battery voltage (OCV) at high speed
Technical parameters
| High-speed Battery Meter | |||||||||
| Model | HT3563 | 0.1μΩ~3.1kΩ | 10μV~60V | ||||||
| Display | 3.5 inch TFT color LCD | ||||||||
| Source | 1kHz±0.2Hz AC, test current amplitude < 100 mA | ||||||||
| Parameters | AC resistance AC-IR, DC voltage DC-OCV | ||||||||
| AC resistance (AC-IR) | |||||||||
| Range | 3mΩ | 30mΩ | 300mΩ | 3Ω | 30Ω | 300Ω | 3kΩ | ||
| Max Reading | 3.1000 | 31.000 | 310.00 | 3.1000 | 31.000 | 310.00 | 3100.0 | ||
| Resolution | 0.1uΩ | 1uΩ | 10uΩ | 100uΩ | 1mΩ | 10mΩ | 0.1Ω | ||
| Measurement current | 100mA | 100mA | 10mA | 1mA | 100uA | 10uA | 10uA | ||
| Accuracy | ±0.5%rdg.±0.04%FS | ±0.3%rdg.±0.02%FSt | |||||||
| 30m Ω~3kΩ range:
±0.02%FS for medium ±0.04%FS for fast (F) ±0.1%FS for ultra-fast (EX. F); 30mΩ~3kΩ range: ±0.01%FS for medium and fast speed (M/F) ±0.02%FS for ultra-fast speed (EX. F); |
|||||||||
| Resistance range | Seven Ranges; Automatic and manual | ||||||||
| DC voltage (DC-OCV) | |||||||||
| Range | 60V | 60V | |||||||
| Max Reading | ±6.0000V | ±60.00V | |||||||
| Resolution | 10uV | 0.1mV | |||||||
| Accuracy | ±0.01%rdg.±0.001%FS | ||||||||
| ±0.001%FS for medium/fast (M/F), ±0.002%FS for ultra fast (EX. F); | |||||||||
| Other Functions | |||||||||
| Sampling Rate | Slow: 3 times/sec.,
Medium speed: 11 times/sec., Fast: 57 times/sec., Ultra-fast: 100 times/sec |
||||||||
| Correction | All ranges short circuit zeroed | ||||||||
| Comparator | 30 records can be programmed; 10-grades sorting; | ||||||||
| Judgment result: resistance and voltage Hi/IN/Lo; Comprehensive judgment, interface display, indicator light, buzzer, external I/O output signal | |||||||||
| Beeper | GD/NG/OFF | ||||||||
| Trigger Mode | internal trigger, manual trigger, external trigger, Auto trigger, BUS | ||||||||
| Interface | RS232 / RS485 / LAN /Handler（PLC interface）/ USB（host） | ||||||||
| Protocol | SCPI / MODBUS | ||||||||
| Power Supply | Voltage:100V-240V AC Frequency:47Hz-63Hz | ||||||||
| Power | Pmax <15VA | ||||||||
| Dimensions | 325mm x 215mm x 80mm（L*W*H）
325mm x 215mm x 96.5mm（L*W*H）adding foot pads |
||||||||
| Weight | 3kg | ||||||||
Device configuration table
| No. | Name | Models | Quantity | remark |
| 1 | Precision battery internal resistance tester | HT3563 | 1 | |
| 2 | Kelvin test line clip type | HT9363A | 1 | consumable material |
| 3 | Kelvin test line probe type | HT9363B | 1 | consumable material, optional |
| 4 | One power cord (GB) | 1 | ||
| 5 | Communication Cable (RS232) | HT9800 | 1 | |
| 6 | Handler interface | I/O interface | 1 | |
| 7 | Manual | 1 | ||
| 8 | Test report | 1 | ||
| 9 | Certificate | 1 | ||
| 10 | Packing list | 1 |
Dimensions
Accessories
